Indus Control & Automation Pvt Ltd is well-known for Bag Filling Machines Manufacturers in Bangalore, India. It is used to fill the most difficult materials to handle, the products manufactured at Indus Control is of high quality and cost-efficient.

Unfilled bags are mounted by hanging the four loops of the bulk bags on the suspended weigh frames easy to reach posts. The inlet spout is secured to the flared end of the filling head by a slip ring seal. The slip ring allows proper positioning of the liner when used. The bag is then inflated and the weight is tared. The electronics has an inbuilt timer- the duration of inflation is time settable. The filling cycle is controlled by the microcontroller for fast and efficient filling. The set points programmed included the target weight, fast/dribble feed, table up / down, no of cycles, vibration on time etc. Once filling and densification are complete the bag’s inlet spout is released from the filling head and tied off. The bulk bag is dismounted from the machine with a forklift by simply driving under the pallet/bag, lifting it and backing out. The filling system can be complete with an upstream delivery device and the control system. The filling spout is concentric with 2 nozzles for AIR purging & aspiration systems. 

The jumbo Bag Filling machines are custom designed, the machines can be provided with a roller conveyor underneath, once the filling is complete, the bag is lowered onto the roller conveyor & then the conveyor is switched on & thereby moving the bag out of the machine. The jumbo bag which is placed on the pallet can be shifted by using a forklift. The bags are of HDPE material, with plastic liner inside. The bag sizes are chosen based on bulk density of the material. Normal bag sizes are 900 x 900 x 1200 mm or 900 x 900 x 1400 mm. The bags are of HDPE material, with plastic liner inside.